HEATPIPE cpu cooler
Published 2011-03-04
(01) Screw (A) x 4
(02) Blot x 4
(03) Screw (B) x 4
(04) White washer x 4
(05) Black washer x 8
(06) Thermal Paste x 1
(07) Clip for LGA 775 & 1366 x 1
(08)Clip for LGA 1156 x 1
(09) All in one clip for AMD x 1
Additional remarks
Intel-Pentium D / P4 (LGA 775) / Core i7 (LGA 1366) / Core i5 (LGA 1156)
STEP 1
Use screw (A) to screw the clip and cooler.
STEP 2
Screw the blots to the holes.(Please refer to the picture.)
STEP 3
Remove the sticker at the bottom of cooler.
STEP 4
Remove the stickers of black washers and stick black washers on the blots.
STEP 5
Apply the proper amount of thermal paste on the CPU.
STEP 6
Put the cooler onto the CPU die and fit with hole position.
STEP 7
Remove the sticker of black washers and stick black washers on screws (B).
STEP 8
Screw the screws in turn.(PS:Recommend to screw diagonally to avoid unequal pressure.)
STEP 9
Connect the power with motherboard.
STEP 10
Finished installation.
For Athelon 64 / Opteron (Socket 754 / 939 / 940 / AM2 / AM2 + / AM3)
STEP 1
Use screw (A) to screw the clip and cooler.
STEP 2
Screw the blots to the holes.(Please refer to the picture).
STEP 3
Remove the sticker at the bottom of cooler.
STEP 4
Remove the sticker of white washers and stick white washers on the blots.
STEP 5
Apply the proper amount of thermal paste on the CPU.
STEP 6
Put the cooler onto the CPU die and fit with hole position.
STEP 7
Remove the sticker of black washers and stick black washers on screws (B).
STEP 8
Screw the screws in turn. (PS:Recommend to screw diagonally to avoid unequal pressure).
STEP 9
Connect the power with motherboard.
STEP 10
Finished installation.
COPYRIGHT EVERCOOL THERMAL CO.,LTD. 2013. ALL RIGHTS RESERVED